Search

Search

SPP6 Hard Start Capacitor 115V Thru 288VAC Hard Start kit for air Conditioner Units from 4,000 to 120,000(1/2 Thru 10H.P.), Increases Compressor Torque 500%

KWD 5
Brand
yrjns
Weight
23 g
– 1 +

Special Features

  • 【Part number】: SPP6 Hard Start Capacitor Replacement. SPP6 compressor hard start boost capacitor can save compressor aging by increasing compressor starting torque by 500%. Made exactly fit for air conditioning compressors from 4000 BTU window units to 120000 BTU commercial units
  • 【Replace】: Compatible with TJ90HS6, AP4502872, HS6, HS650, 35702, DST-6, EPP6, HS6, HS650. Suitable for various air conditioning compressors, including 4000 BTU to 120000 BTU air conditioning units, hard start kit can be used for refrigeration compressors, heat pumps, and other heavy duty or frequently started motors
  • 【Easy to Fix】: Connect the two wires from the SPP6 in parallel with the run capacitor(one wire each side)without removing any original wires. Only need to be connected in parallel with the running capacitor.Easy to install, saves time and effort and can save you a large amount of maintenance costs
  • 【Note】: Use special"piggy back"terminal of the SPP6 if all the run capacitor terminals are being used. Install only on PSC units equipped with run capacitor⚠Be sure to disconnect the power supply before starting maintenance. Danger of electric shock To prevent serious personal injury caused by electric shock, ensure that the power supply of electrical appliances is switched off
  • 【Package Includes】: 1 X SPP6 Hard Start Capacitor. Replace for Appliance produces noise during startup; System takes a while to startup; Want to reduce energy consumption

Description

The SPP6 is designed for permanent split capacitor single phase air conditioning and heat pump systems.
Starting capacitors are used in single-phase AC motors, air conditioners, refrigerator compressors, etc.Including relays and starting capacitors to provide 500% starting torque.

Installation Notes:
Connect the two wires of the SPP6 in parallel with the run capacitor (one wire on each side) without removing any of the original wires.
If all run capacitor terminals are being used, use the SPP6's special "piggyback" terminals.
2-wire connection:The two-wire hard-start kit is connected in parallel with the run capacitor for Permanently Split Capacitor (PSC) type compressors;
and connects to the start and run terminals on the compressor for Capacitor Start Induction Run (CSIR) type compressors. A third connection to the common wire is not required.

Please feel free to contact us if you have any questions or need any help during usage, we will help you to solve your problems in time!

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}