APPLICATION RANGE:
The push-to-connect fittings are used for quick connection and repair of polyurethane or nylon tubing to change the direction of water flow between pipes. Widely used for air compression systems, vacuum systems, and pneumatic systems.

DURABLE DESIGN:
1. The male thread socket connector is suitable for sliding connection of most polyethylene and nylon water pipes, including garden, irrigation, sewer, balcony, swimming pool and other pipe fittings, which reduces friction to enhance water flow speed.
2. Made of thick and durable plastic and metal, which has abrasion resistance, high-pressure resistance, compressive and corrosion resistant, and is lightweight.
3. Push-to-connect tube connection on one end and male threads on the other end design. Rotating the cap can adjust the angle problem when installing.

PACKAGE INCLUDE:
1 Pack of 8mm to 1/2 NPT male connector, which total size is 54mm x 29.5mm x 15mm/2.13 x 1.16 x 0.59 inch (L*W*H ); Male thread size is 1/2 NPT; Dual tube diameter is 8mm / 5/16 inch; Operating pressure is 0 to 1MPa; Operating temperature is 0 to 60 Degree Celsius.

NEED ATTENTION:
Please note the proper temperature and pressure range to use and cut the pipe flat, with no slope. Insert the tube into the bottom of the fitting and try to pull the tube, if it doesn't come out it's a success. When loosening the tube, first confirm that there is no pressure in the tube, and then press the end cap evenly to the bottom.