Search

Search

Inverted Fuel Gas Line Brass Fitting [48W04] Connector Coupling flare Connector 1/4" x 1/4" 100% Brass [48W04] to 1/4 inverted Flare x 1/4 Male NPT

KWD 3
– 1 +

Special Features

  • Brake line adapter fitting The Female side is 7/16-24 UNF Thread (1/4) INVERTED FLARE and Adapts to 1/4 NPT male on the other side with a straight style fitting
  • Adapts 1/8" inverted flare female tube nut to 1/4" NPT Male CONECTOR FLARE INVERTIDO Hembra x NPT MACHO
  • Suitable for service: the propane tube connector allows you to connect the 1/4 inch reverse flare propane tail to a regulator with 1/4 inch female NPT port.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Quality fittings for most automotive plumbing Grills Tanks Brakes Motors Rv
  • These products contain lead and are not allowed by Federal Law to be installed for potable water use in the U.S.A. and its territories.

Description

Consumer Note: It is recommended for the installation to be performed by a qualified person or licensed contractor, plumber, or gas-fitter technician. Use pipe thread sealant between all connectors for proper seal and leak test all connections prior to use as a safety measure. Not intended for Potable Drinking Water Use or Human Consumption Applications

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}