Feature:
Foot pedal controlled.
Free to set 16 kinds of ways.
Suck-back feature ensure no dripping.

Specification:
Power : AC 110V ± 10% / 50Hz
Power consumption : Air source : Maximum 0.99MPa ( clean dry air without lubrication )
Pressure adjustment range : 0.05MPa-0.99MPa
Time adjustment range : 0.01S--30S, the time available to a variety of modes
Function Mode : Manual mode / automatic mode
Vacuum features : adjustable negative pressure control to 600 mm Hg
Repeatability and spit Frequency: Accuracy : ± 0.05% Frequency: 600 beats / min
Minimum discharge rate : 0.01ml

How to use:
1. Power input socket, power Switch: putdown light on shows “On”, light off shows “Off”
2. Dispensing time : Scale knob switch adjustment
3. Input air pressure pressure governor: First pull out, Reversal is lower pressure,veering is the higher pressure
4. Barometer: display range: 0-100pSi
5. Vacuum control unit: Reversal is Vacuum pumpback high, veering is the Vacuum pumpback low
6. Testing button: During testing, it can replace the foot switch
7. Dispensing time : Scale knob switch adjustment display range 0.01S--30S, the time available to a variety of modes
8. Dispensing output interface: Connect to dispensing needle cylinder.
9. Air pressure input interface: Connect to clean high pressure source
10. Dispensing way: 16 kinds of free way
11. The foot controller interface: Connect to foot switch
12. Fuse holder

Package Included:
1 x Solder Paste Liquid Controller Dropper
1 x Dispenser Stand
1 x Hand Switch
1 x Foot Switch
1 x Power Cable
1 x Air Tube to Barrel
3 x 30cc Liquid Barrels
1 x Air Tube to Air Supply
1 x Steel & Plastic Tip Needles Set