Tips for use:
Tip 1: Do Not Drill This Into The Center of Your Log. Drill on the edges of your log, it will split much easier that way and help to prevent the tool getting stuck.
Tip 2 - Avoid knots like the plague. It will get stuck if you try to go through a knot.
Tip 3 - If you drill on the left side of the log/wood then it will take advantage of the rotation of the drill. If you are drilling on the ground then put your knee or foot against the log to prevent it from spinning, or you can angle it a bit so it rotates into the ground. Best situation you have a table/station that you can use that maybe even has a stop built into it.

Specification:
Type: Core Drill Bit
Material: high carbon steel
Application: Wood drilling
Used for: Hammer Drill
Drill Type : rhinestone round,hex handle electric hammer drill bit, round handle electric hammer drill bit, square handle electric hammer drill bit

Package Included:
1* Wood Splitter Drill
3* Handles ( Square Handle+Round Handle+Hex Shank )
OR
2* Wood Splitter Drill
3 x Handles ( Square Handle+Round Handle+Hex Shank )

NOTE:
1. Split tough oak, hickory, walnut, sycamore; Not recommended for knotty woods or large diameter hardwoods.
2. Suitable for dry wood
3. Be sure to start separating from the edge of the wood. Do not start separating from the middle of the wood as it will get stuck.
4. The 32MM Firewood Log Splitter is suitable for drilling rigs above 750w; The 42MM Firewood Log Splitter is suitable for drilling rigs above 1000w