Search

30cm x 5m PCB Portable Photosensitive Dry Film for Circuit Production Photoresist Sheets Electronic Components

KWD 5.500

Brand
QIXINSTAR
Weight
148 g
1 +

Special Features

  • 1 x Dry Film Photoresist
  • Dry Film Photoresist Size: approx. 30cm*500cm/0.98*16.4ft
  • 1.5 mil dry film can fully cover a 0.25 inches thickness hole.
  • The dry film is available in most common use of the plating bath, no wrinkles, no color.
  • High Resolution.

Description

Features:
Photographic film, also known as dry film, is used to make PCB board.
Stick it on top of the PCB, it will become a sensitive circuit board.
Suitable for plating, hole covering, and the etching process.
Excellent ability to cover holes.
High Resolution.
Excellent adhesion to almost all surfaces.
Image clarity after exposure.
Front-panel is very clean after developed.

Etching:
The dry film is resistant to most of the acid etching solution,
the PH value can be resistant to most alkaline etching solution between PH8.0 ~8.5.

Cover hole:
1.5 mil dry film can fully cover a 0.25 inches thickness hole.

Plating:
The dry film is available in most common use of the plating bath, no wrinkles, no color.

Specification:
Dry Film Photoresist Size: approx. 30cm*500cm/0.98*16.4ft

Note:
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.

Package content:
1 x Dry Film Photoresist

Related Items


{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}