Epindon Hall Effect Replacement Stick Module with tactile buttons Compatible with Victrix Pro BFG Wireless Controllers(No rubber needed)

A hand-made personalized stick module compatible with Victrix Pro BFG controller by Epidnon, and a T2.0 screwdriver was included.
No Drift Hall Effect Sensor Sticks:Revolutionary electromagnetic stick module solves the drifting problem, and increasing the precision and durability.
Improve module issues such as drift by replacing existing module on the Left stick。【NOTE : 】Pressing the D-pad tactile switch too hard may lead to misidentification, so please do not press it firmly.
Easily installation. Unscrew the screws of faceplate and stick module PCB board with attached T2.0 driver; Replace the stock module with Epindon customized hall effect electromagnetic module.【Attention : 】please insert and remove connector pins of left stick module slowly.【TIPS:】Place the controller on a flat, horizontal direction to ensure accurate calibration. it may be necessary to recalibrate for several times.
Calibration is required after installation. Calibration method: Press the L( R )stick and function button at the same time, the function button LED will flash. At that time, turn the L(/ R) stick left (counterclockwise) and right (clockwise) 3 times each. Then press the function button again, the white LED will turns off to complete the module Calibration.
【Warm tips:】1). the position of function button is different for PS5 & Xbox ; 2). our stick modules is tested and 1 month warranty;If any questions or concerns , Please contact: support@epindon.com.

Product Including:
● Epindon stick module 1Unit (L stick)
● T2.0 screwdriver

Hello,