The Leecraft Zero-Clearance Table Saw Insert supports work right up to the blade. With outstanding durability and wear-resistance, it also reduces chip-out and splintering. The zero-clearance concept is simple: the blade cuts its own perfectly sized slot by being raised through a machinable "blank" insert. Made from high-density phenolic laminate with a bonded-melamine surface, the insert is 1/2-inch thick. It offers superior rigidity, flatness, durability, and low friction. Other features include leveling screws, side and end adjustment screws for a vibration-free fit, a rear safety pin for lift-out protection, and a precut blade bottom pocket that provides clearance for fully retracted blades and bevel cuts. Designed for the Delta table saw with carbide-tipped blades only, this insert comes with Leecraft's lifetime warranty.
The Zero Clearance concept is simple: the blade cuts its own perfectly sized slot by being raised through a machinable "blank" insert. These inserts are 1/2-inch thick, high-density phenolic laminate, with a bonded-melamine surface. They offer superior rigidity, flatness, durability, and low friction. They feature leveling screws, side and end adjustment screws for a vibration-free fit, rear safety pin for lift-out protection, and a precut blade bottom pocket that provides clearance for fully retracted blades and bevel cuts. Instructions also included. Use carbide-tipped blades only. Fits Delta right- and left-tilt saws. The color of the table saw insert you receive might vary from the model shown above.