The Tilt-Adjustable Raspberry Pi Camera Mount attaches directly to the RaspberryPi case for an easy and clean solution to tilt your PiCam up or down, then hand-tighten with the wing nuts. Designed for the hole pattern of the RPi Camera Module v1 and v2 as well as the 'ArduCam 16MP Autofocus' and the Raspberry Pi AI Camera. Does not obstruct any of the port slots in the Raspberry Pi case. Made out of clear acrylic.
Dimensions:
Mounting surface: 1" / 25.4mm x 2.35" / 60mm
Height: 1.75" / 45mm
Width with camera module mounted and tilted horizontally: 1.6" / 40mm
What's included:
See picture of disassembled mount. Includes the two acrylic parts, all bolts, nuts, spacers, screws, double stick tape and assembly instructions. Does NOT include camera module, RaspberryPi circuit board nor RaspberryPi enclosure.
Tools required for assembly (not included):
- Small Phillips screwdriver (PH0)
- Pliers to hold the nut while tightening