Search

Search

Amplifier Speaker Switcher Selector Supports 4 Input 4 Output

KWD 53.500
Brand
NYSDH
– 1 +

Special Features

  • The amplifier speaker switcher supports 4 amplifiers to input and 2 pairs of speakers to output
  • Only one amplifier and one pair of speakers can be used at a time
  • With a 6.35mm headphone jack and headphone volume can be adjusted independently
  • Two wiring methods. 1. Forward wiring: four amplifiers and two pairs of speakers. 2. Reverse wiring: two amplifiers and four pairs of speakers
  • Banana interfaces are used as the inputs and outputs of the switcher. Plug and play, no power supply required. There is no loss in input and output
  • Mechanical 4-position rotary switch is used to choose one amplifier to input
  • With a metal shell. Its compact size makes it fit any system and compatible with all types of power amplifiers and passive speakers
  • Up to 12AWG speaker wire can be used
  • Stereo speakers with impedance from 4 to 16 ohms are supported. Each channel supports up to 300W
  • Inputs and outputs can be switched manually. Plug and play. The switching signal is stable and there is no interference or noise between the channels

Description

Channel power: Each channel supports up to 300W,Input channel: support 4 amplifier stereo inputs (not for 5.1 or 7.1 amplifiers),Output channel: Support 2 pairs of passive speakers to output,Input switching: 4-position and 2-position rotary switches,Frequency response: 10Hz-50KHz,Output impedance: 4-16 ohms,Input and output interface: standard red and black banana interface

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}