Idatalink Maestro HRN-HRR-SU1 T-Harness for Select Subaru Vehicles 2008-15, replace the factory radio while retaining steering wheel controls & use of amp (ADS-MRR or ADS-MRR2 module required)
Idatalink plus Subaru
Working in conjunction with the Maestro ADS-MRR or ADS-MRR2 module, Idatalink's HRN-RR-SU1 interface harness allows you to connect a new Idatalink-ready car stereo in select 2008-15 Subaru vehicles. Once connected, you'll retain the use of your steering wheel audio controls, your Subaru's amplifier and subwoofer (including the fader), and the factory back-up camera in these vehicles. This installation harness will not work with car stereos that do not feature an Idatalink serial port.
The package includes connectors that plug in between the Maestro module and your factory radio's wiring plugs. You'll have to solder or splice together this harness's power/ground, illumination, speaker, and navigation output wires to the corresponding wires on your aftermarket receiver's wiring harness. You'll appreciate the additional features added by the adapter, including the ability to view performance gauges and vehicle information on the new radio's screen.
With your Idatalink-ready car stereo, you'll be able to set up gauges on your receiver's screen to monitor engine performance, tire pressure, and other functions. You'll also be able to read and reset the vehicle's Check Engine codes.
Product highlights:
◾Allows installation of a new Idatalink-ready receiver in select Subaru models (also requires the Maestro ADS-MRR or ADS-MRR2 module)
◾Only works with select Alpine, JVC, Ken wood, Sony, and Pioneer receivers with Idatalink port
◾Retains steering wheel audio controls
◾Retains your Subaru's amplifier and subwoofer (including the fader)
◾Displays engine gauges and Check Engine codes on touchscreen
Retained Factory Features: The following factory features (if applicable) are retained when replacing your factory radio with a compatible Idatalink Serial Port head unit (from Ken wood, JVC, Alpine, Sony, and Pioneer) or other aftermarket head unit using the Maestro RR or RR2 Car Radio Replacement Interface module and HRN-HRR-SU1 installation harness.
◾Factory steering wheel controls (SWC) with two-function programmability
◾Factory amplifier & sub (with turn-on & fader)
◾Factory backup camera
Extra Features:The following Extra features are added when replacing your aftermarket head unit with a compatible Idatalink Serial Port head unit from Ken wood, JVC, Pioneer, Sony, or Alpine using the Maestro RR or RR2 Car Radio Replacement Interface module and HRN-HRR-SU1 installation harness.
◾Selectable Performance Gauges
◾Read/Reset Check Engine Codes
What's in the box:
◾Idatalink HRN-HRR-SU1 Vehicle-specific Harness
◾Sub harness
◾Backup camera harness
◾Jumper harness
◾Blue/white wire harness
◾OBDII harness
*INSTALLATION NOTE: This HRN-HRR-SU1 car stereo installation T-harness requires the purchase of the Idatalink Maestro ADS-MRR or ADS-MRR2 Interface Module (sold separately) and an Idatalink compatible aftermarket car stereo unit and it's corresponding Idatalink Maestro Car Stereo Head-Unit Harness. The HRN-HRR-SU1 supports Idatalink's Direct T-Harnesses (sold separately) for direct connection to select Idatalink Serial Port compatible head units (ACC-HU-ALP1 (Alpine), ACC-HU-PIO1 (Pioneer), ACC-HU-SON1 (Sony), ACC-HU-KEN1 (Ken wood/JVC with 22-Pin Connector) or ACC-HU-KEN2 (Ken wood/JVC with 16-Pin Connector) Installation T-Harness. Sold separately.) - replacing the wiring harness that comes with your aftermarket stereo (some hardwiring may still be required). If connecting to an aftermarket headunit that does not support an Idatalink Direct T-Harness, you'll need to cut-off and remove the 20-pin black connector from the HRN-HRR-SU1 harness and each wire spliced directly to the aftermarket radio's corresponding wire.
ADS-MRR: (Vehicle Coverage: 30 Makes - Models: 4318 - Years: 2002+)
ADS-MRR2: (Vehicle Coverage: 30 Makes - Models: 4582 - Years: 2002+) with 3 Programmable Outputs
MFR#: HRN-HRR-SU1
This Idatalink Maestro HRN-HRR-SU1 T-Harness replaces the HRN-RR-SU1.