How to wiring:
1、Put the network cable into the special cutting port rotate to cut the outer cover.
2、Remove the plastic skin;
3、Arrange the core sequence.
4、Put the core into the wire cutter.
5、Cut the cable neatly.
6、Plug the cable into the bottom of the product.
7、Plug the product with the cable into the voltage connector.
8、Align and press hard to complete product pressing.
9、After the product is properly pressedthe sianallights on both sideswill flash successivelyand the No. 8 light will flash.
NOTE:
1、When you are making, you need to pay attention to whether the direction of the RJ45 non-pass through connector is consistent with the order of the wire cores to avoid the wrong wiring direction.
2、Before crimping, please make sure that the CAT6 RJ45 non-pass through ends have been fully pushed into the jaws of the tool,otherwise it will lead to cut and crimp incompletely.
RJ45 CAT6 non-Pass Through Connectors,for UTP Solid Wire & Standard Cables.
non-Pass Through 8P8C CAT6/6E Gold Plated Ethernet Connectors are designed for fast,reliable installations for Category 6 networks.
RJ45 cable connector termination solution for making custom length Ethernet patch cords.
Enhance signal integrity and clarity by reducing the distance between wire twists and contacts. The metal connector pins work by piercing the cable jacket and contact the copper wire, making a good contact with the metal contacts in the RJ45 plug, making the contact attach to the core closer.
Package Include:20pcs non-Pass Through 8P8C RJ45 CAT6/6E modular data plug.