Daiwa CN-501H2 HF/VHF Bench Meters offer quality and performance at a reasonable cost. These cross-needle SWR Power Meters are right at home in any ham shack, with three power ranges to suit any need. Simultaneous measurements of forward and reverse power and SWR during antenna testing and equipment tuning very easy. You'll be able to quickly peak your transmitter or amplifier! Daiwa's lighted dual-needle meter measures forward power with one indicator and reflected power with the other. Where the needles cross is your SWR… read all three at the same time! Daiwa CN-501H2 HF/VHF Bench Meters offer many fine features: * HF power handling: 2,000 watts maximum * Connectors: UHF (SO-239) . * Frequency: 1.8-150MHz * Forward Power Ranges: 20/200/2.0 kW * Power Rating: 2.0 kW (1.8-60MHz) 1 kW (144MHz) * Peak reading for SSB operation (external DC power required) * Accuracy: plus / minus 10 percent (at full scale) * SWR Detection Sensitivity: 4W minimum * Input / Output Impedance: 50 OHM * Input / Output Connectors: SO-239 * Dimensions 5in x 3in x 4in * Weight: 1lb. 8 oz. * Back-lit meters with external 12-14 volt supply, 2.5mm DC input jack (also required for peak function) Daiwa Economy Series HF/VHF or VHF/UHF Bench Meters from DX Engineering are a great choice for value, quality, form and function!