- Shopping, made easy.
- /
- Get the app!
ESP32-S3 4.3inch Touch Screen Development Board Capacitive IPS Display 800x480, 32-Bit LX7 Dual-Core Processor Support 2.4GHz W-i-F-i and Blue-Tooth 5 (LE), Onboard CAN, RS485, I2C Interface,etc.
KWD 17
Official Pi PCIe to M.2 HAT for Raspberry Pi 5, HAT + Standard, Comes with RPi 5 Active Cooler, Supports NVMe Protocol M.2 Solid State Drive 2230/2242 High-Speed Reading/Writing
KWD 11
RP2040 Microcontroller Development Board with 1.69inch Touch Round LCD 240x280, Based on Pi RP2040, Dual-core Arm Processor, 16MB Flash,Accelerometer and Gyroscope Sensor, Type-C Connector
KWD 12
PCIe to M.2 Adapter with PoE Function Compatible with Raspberry Pi 5, Pi 5 POE HAT M.2-M-Key HAT+ Supports NVMe Protocol M.2 SSD 2230/2242, IEEE 802.3af/at Network Standard with Metal Heatsink
KWD 13
-8%
Compatible with Raspberry Pi Pico 2 Microcontroller Board, with Yellow Pre-Soldered Header, Based on Official RP2350 Chip, Dual-Core & Dual-Architecture Design 4MB Flash, 3 Items
KWD 6
Luck-Fox Pico Plus RV1103 Linux Micro Development Board, Integrates ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors with Ethernet Port, 64MB DDR2, 0.5TOPS, Supports int4, int8 and int16 NPU
KWD 7.500
Waveshare 2PCS 2.13inch E-Ink Display HAT V4 Version, Black/White Two-Color 250x122 Pixel E-Paper for Raspberry Pi 5/4B/3B+/3B/2B/Zero W/WH/Zero 2 W/Jetson Nano SPI Interface, Support Partial Refresh
KWD 14.500
PICkit 5 in-Circuit Debugger/Programmer, Programmer-to-Go Support, Type-C Port, Supports MPLAB, Card Programmer
KWD 59.500
SX1262 LoRaWAN/GNSS HAT SX1262 RF Chip LoRa Module Expansion Board for Raspberry Pi 5/4B/3B+/Pi3B/Pi Zero W WH/Zero 2W, with Magnetic CB Antenna, Suitable for Sub-GHz Band Network, with GNSS Antenna
KWD 13.500
Luck-Fox Pico Ultra W PoE Kit RV1106 Linux Micro Development Board, Integrate ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors, 256MB DDR3L 8GB EMMC, with Onboard W-i-F-i, POE Module
KWD 16.500
RTL8822CE Wireless NIC Wireless-RTL8822CE Wireless Card Support 2.4G/5GHz Dual-Band WiFi 5, Bluetooth 5.0, Compatible with Jetson Xavier NX, Jetson Orin NX, Jetson Orin Nano Module Expansion Board
KWD 6
PCIe to M.2 Adapter Board for Raspberry Pi 5, Pi 5 NVMe HAT Compatible with 2280/2260 / 2242/2230 Size NVMe Protocol M.2 SSD, 8Gbps Data Rate, High-Speed Reading/Writing
KWD 6
PoE Expansion Board for Jetson Orin Nano or Jetson Orin NX, PoE (Power Over Ethernet) Capability, IEEE 802.3af/at-Compliant,Provide Network Connection and Power Supply for Jetson Orin in One Cable
KWD 9.500
PCIe to M.2 4G/5G and USB 3.2 HAT+ for Raspberry Pi 5, PCIe to USB3.2/M.2 Adapter Board Compatible with Pi5 and 4G/5G Modules with M.2 Key B Interface, with 3X USB 3.2 Gen1 Ports, 5G-4IN1-PCB Antenna
KWD 19
ESP32-S3 Development Board with 1.28inch Round Touch LCD 240×240 Pixel 65K RGB Color, 32-bit LX7 Dual-Core Processor with 6-axis Sensor, Support 2.4GHz W-i-F-i (802.11 b/g/n) and Blue-Tooth 5
KWD 11.500
Waveshare 2.13inch E-Ink Display HAT 250x122 Pixel E-Paper for Raspberry Pi 5/4B/3B+/3B/2B/Zero W/WH/Zero 2 W/Jetson Nano SPI Interface, Black/White Two Display Colors, Support Partial Refresh
KWD 9.500
Waveshare Industrial Grade 2-Ch CAN to Ethernet Server, 2-Ch CAN + RS485 + Ethernet Port, Supports CAN to Ethernet and RS485, CAN Repeater, Dual Socket Aluminium Alloy Case, Wall-Mount Support
KWD 30
CM4 Adapter, Interface Protection Adapter Board for Raspberry Pi Compute Module 4 Lite/eMMC, Physical Protection for Frequent Plugging and Unplugging of CM4 Socket
KWD 6
Industrial USB TO TTL Converter Board, with Original FT232RNL Better Stability&Compatibility, Embed Resettable Fuse ESD/IO Protection Diodes Compatible with Mac Linux Android WinCE Win7/8/8.1/10/11
KWD 6
ESP32-S3 Microcontroller Board with 1.85inch Round Touch LCD 360×360 Pixels, Micro LCD Display with ESP32-S3, Accelerometer and Gyroscope Sensor, with 8Ω 2W Speaker, Support W-F-i & B L E 5
KWD 17.500
3PCS ESP32-S3 Mini Development Board with Pre-Soldered Header, Based on ESP32-S3FH4R2 Processor, 240MHz Running Frequency, Support 2.4GHz Wi-Fi & Bluetooth 5, Onboard 4MB Flash Memory
KWD 11
Industrial 8-Ch Analog Output Module 12-bit DA Conversion DC 7~36V Wide Voltage Power Supply, Sending Modbus RTU Protocol Commands via RS485, 8-CH Voltage Output (0~10V)
KWD 12
-8%
Compatible with Raspberry Pi Pico 2 Microcontroller Board with Pre-Soldered Header, Based on Official RP2350 Chip, Dual-Core ARM Cortex-M33 and Dual-Core Hazard3 RISC-V Processor 4MB Flash, 3 Items
KWD 6
ESP32-S3 Microcontroller Board with 1.47inch LCD Display 172×320 262K RGB Color, Dual-core Processor Up to 240MHz, Support W--iF-i & BLE, With Colorful RGB LED,Onboard multiple Peripheral Interfaces
KWD 8.500
ESP32-S3 Mini Development Board, Based on ESP32-S3FH4R2 Dual-Core Processor
KWD 5
ESP32-S3 Development Board Onboard 8x8 RGB LED Matrix and QMI8658C Attitude Sensor,17 x Multi-Function GPIO Pins, Supports Wi-Fi and Bluetooth LE, 240 MHz Xtensa 32-bit LX7 Dual-core Processor
KWD 6.500
ESP32-H2 Microcontroller Development Board with Pre-Soldered Header Onboard ESP32-H2-MINI-1-N4 Module 96MHz Processor Built in 4MB Flash, Supports BLE/Zigbee/Thread Wireless Communication
KWD 5.500
RP2040 Microcontroller Development Board with 1.28inch Round Touch LCD 240×240 Pixel IPS Display 65K RGB Color with CNC Metal Case, Accelerometer and Gyroscope Sensor, Type-C Connector
KWD 15
RP2040-LoRa Development Board, Integrates SX1262 RF Chip, Long-Range Communication, Includes LoRa Board, Antenna 850~930 and IPEX to SMA Adapter Cable and USB Type-C Adapter Board and FPC Cable
KWD 9.500
2.15inch e-Paper HAT+ Compatible with Raspberry Pi 5/4B/3B+/Zero/Zero W/Zero 2W/Pico/Pico W/Pico 2/Jetson Nano/RDKX3, Red/Black/White Three-Color 296x160 E-ink Display Screen SPI with Driver Board
KWD 9
7.3inch ACeP 7-Color E-Paper for Raspberry Pi 5/ 4B/3B+/3B/2B/A+/Zero W/WH/Zero 2 W/Jetson Nano SPI Interface, E-Ink Display 800 x 480 Pixels SPI Interface 3.3V/5V
KWD 33
ESP32-S3 RGB LCD Driver Board Comes with 2.8inch Round Touch Screen TFT RGB Display LCD 480×480 Pixels, with 32-bit LX7 Dual-Core Processor, 8MB PSRAM and Flash, Support W-i-F i & Blue-Tooth
KWD 19
