Specification：
Input
Type: RCA stereo connectors
Impedance: approx. 47K ohm
Max. input level: -30 dBu @ 1kHz
Output
Type: RCA stereo connectors, 3.5mm stereo connector
Impedance: approx. 100 ohm
Max. output level: +10 dBu @ 1 kHz
System Specifications
Frequency response: RIAA
THD: 0.06% typ. @ -40 dBu/1 kHz
Gain: 40 dB
Signal-to-noise ratio: 68 dBu @ 0 dBu, A-weighted
Input sensitivity: 5.3mV@1kHz.
Power Supply
Mains connection: external power supply, 12 V / 1000 mA
Note:
1.In case the volume level of the signal source is set too high, the product may produce distortion!
2.The product only supports phono input, using other devices will cause noise at high volume due to excessive input.
3. If there is a humming sound when using the product, please connect the earth wire from the turntable to the product, or replace it with a better quality shielded RCA cable.
4. The product will convert the phono audio signal to normal audio, so the rear device needs to be plugged into AUDIO IN instead of PHONO IN.
Package includes:
1 x Phono Preamp
1 x Power Adapter
1 x User Manual