- Shopping, made easy.
- /
- Get the app!
waveshare 1.69inch LCD Display Module, 240x280 IPS Screen, 262K RGB Display Colors, SPI Interface,Embedded ST7789V2 Driver chip, Using SPI Interface, Compatible with Arduino,Raspberry Pi, STM32, etc.
KWD 6.500
waveshare RP2040-PiZero Development Board Based On Raspberry Pi RP2040 Microcontroller 264KB SRAM 16MB Flash Memory, Onboard DVI Interface/TF Card Slot/PIO-USB Port/Raspberry Pi 40PIN GPIO Header
KWD 5
waveshare 10.4inch QLED Quantum Dot Display, 1600×720 Resolution, Supports All Versions of Raspberry Pi, Compatible with Jetson Nano and PC
KWD 43.500
Ethernet/USB HUB HAT Board with ABS Case for Raspberry Pi Zero 2 W/Zero 2WH/Pi Zero/Zero W/Zero WH,with 3X USB Ports, Compatible with USB 2.0/1.1 and 1x RJ45 Ethernet Port 10/100M Auto-Negotiation
KWD 7.500
7inch HDMI LCD (H) (with case) Capacitive Touch Screen 1024x600 IPS Display Monitor with Toughened Glass Cover Support All Raspberry Pi 4B/3B+/3B/2B/Zero/Jetson Nano/Banana Pi/Windows 10/8/7
KWD 26
Waveshare 7inch Capacitive Touch Screen LCD Compatible with Raspberry Pi 4B/3B+/3A+/2B/B+/A+/Zero/Zero W/WH/Zero 2W CM3+/4 1024×600 Resolution HDMI IPS Low Power Consumption Supports Windows
KWD 20
waveshare 15.6inch Capacitive Touch Screen LCD with Case Compatible with Raspberry Pi4B/3B+/3A+/2B/B+/A+/Zero/Zero W/WH/Zero 2W CM3+/4 1920×1080 Resolution HDMI IPS Supports Jetson Nano/Windows
KWD 72.500
ESP32-C3 Mini Development Board with Pre-soldered Header, Based on ESP32-C3FN4 Single-core Processor, 160MHz Running Frequency, Support 2.4GHz Wi-Fi (802.11 b/g/n) & Bluetooth 5
KWD 4
waveshare 8inch 2K Capacitive Touch Display, Optical Bonding Toughened Glass Panel, 1536×2048, IPS, High Compatibility
KWD 47.500
for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero 2W/ 2WH, Isolated RS485 CAN HAT, 2-Ch RS485 and 1-Ch CAN, SPI Communication, Bulit-in Power Supply Isolation, ADI Magnetical Isolation, TVS Diode, etc
KWD 7
waveshare 2.9inch E-Paper E-Ink Display Module for Raspberry Pi Pico 296×128 Pixels Black/White Partial Refresh Support with SPI Interface
KWD 9.500
POE HAT Board Compatible with Raspberry Pi 5, Power Over Ethernet HAT with Cooling Fan and Metal Heatsink for Pi5, Supports 802.3af/at Network Standard
KWD 12
-4%
waveshare 13.3inch Capacitive Touch Screen LCD Compatible with Raspberry Pi 4B/3B+/3A+/2B/B+/A+/Zero/Zero W/WH/Zero 2W CM3+/4 1920×1080 Resolution HDMI IPS Supports Jetson Nano/Windows
KWD 63
Raspberry Pi Zero 2W to Pi 3B/3B+ Adapter, Based on Raspberry Pi Zero 2 W to Reproduce Original Appearance of Pi 3B/3B+, Alternative for Raspberry Pi 3 Model B/3B+, Compatible with Pi 3B/ 3B+ HATs
KWD 9
Waveshare SIM7600G-H 4G Communication Module, Multi-Band Support, Compatible with 4G/3G/2G, with GNSS Positioning-Standard Version
KWD 30
waveshare 10.1inch HD Capacitive Touch Screen LCD Compatible with Raspberry Pi 4B/3B+/3A+/2B/B+/A+/Zero/Zero W/WH/Zero 2W CM3+/4 1920×1200 Resolution HDMI IPS Supports Windows/Jetson Nano
KWD 59
Waveshare 7.5inch E-Paper E-Ink Raw Display Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH/Zero 2W Series Boards 800×480 Pixels Three-Color with SPI Interface Without PCB
KWD 22.500
waveshare RPi Relay Board Raspberry Pi Expansion Board, Three Channel (3-CH) Power Relay Module for Raspberry Pi 4B/3B+/3B/2B/A+/B+, Loads up to 5A 250V AC or 5A 30V DC
KWD 8
waveshare 4inch HDMI Capacitive Touch IPS LCD Display Compatible with Raspberry Pi 4B/3B+/3A+/2B/B+/A+/Zero/Zero W/WH/Zero 2W CM3+/4 720×720 Resolution Supports Jetson Nano/Windows
KWD 30
Waveshare PCIe to M.2 Adapter Board (E), Compatible with Raspberry Pi 5, with Cooling Fan, Support 2242/2230 Size NVMe Protocol M.2 S S D, 8Gbps Data Rate, High-Speed Reading/Writing
KWD 9
Waveshare Luckfox Pico Ultra RV1106 Linux Micro Development Board, Integrates ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors, with 8GB EMMC, with PoE Module and Onboard WiFi
KWD 17
Waveshare SX1262 LoRaWAN Node Module Expansion Board, Compatible with Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico WH, with Magnetic CB Antenna-433/470M, with GNSS Function
KWD 14
Waveshare RP2040-Zero with Pre-soldered Header High-Performance Pico-Like MCU Board Based On Raspberry Pi Microcontroller RP2040 Castellated Module Allows Soldering Direct to Carrier Boards-2pcs
KWD 6.500
waveshare PoE HAT (G) for Raspberry Pi 5,Power Over Ethernet HAT (G) Expansion Board Comes with Raspberry Pi 5 Official Case, IEEE 802.3af/at Network Standard,5V 5A Output
KWD 13.500
Waveshare 4.2inch E-Paper E-Ink Display Module (B) for Raspberry Pi Pico 400×300 Pixels Red/Black/White with SPI Interface
KWD 19
2X 40 PIN GPIO Header Adapter Color-Coded Header Expansion Board for Raspberry Pi 400,Easy Expansion
KWD 4.500
waveshare for Raspberry Pi 5 USB to UART Debugger Module,6PIN/3PIN Cable Connecting with Raspberry Pi 5,High Baud Rate Transmission,Supports Mac, Linux, Android, Windows 7/8/8.1/10/11, Black
KWD 4
Waveshare NVME PCIe to M.2 Adapter with PoE Function for RPI, Compatible with Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive 2230/2242, Supports 802.3af/at Network Standard
KWD 13.500
Waveshare Raspberry-Pi-Pico-2-M, Compatible with Raspberry Pi Pico 2 Microcontroller Board, Based On Official RP2350 Chip, Dual-Core & Dual-Architecture Design, 3 Items
KWD 6
Waveshare 2PCS POE HAT Type C, Compatible with Raspberry Pi 3B+/4B, 802.3af/at Power-Sourcing Equipment Required, 12V and 5V Power Outputs to Support More Peripherals-2PCS Version
KWD 19.500
Waveshare ESP32-H2 Microcontroller Development Board onboard ESP32-H2-MINI-1-N4 Module, 96MHz Processor, Integrated Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) Wireless Communication
KWD 5
2PCS Waveshare ESP32-C6 Microcontroller, WiFi 6 Development Board, 160MHz Single-Core Processor, ESP32-C6-WROOM-1-N8 Module, Supports USB and UART Development with Pre-soldered Header
KWD 10
