All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
ESP32-S3-Touch-LCD-2.1 is a microcontroller development board, onboard 2.1inch capacitive touch display, 480×480 resolution, 262K color, can smoothly run GUI programs such as LVGL.
Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency.
Supports 2.4GHz W-F-i (802.11 b/g/n) and BLE (LE), with onboard antenna. Built-in 512KB S R AM and 384KB ROM, with onboard 16MB Flash and 8MB P S RAM.
Supports touch control via I2C interface, with interrupt support. Adapting UART, I2C and some IO interfaces, integrates full-speed USB port
Onboard QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc.
Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
Provide Online Development Resources /User Manual: bit.ly/48mUJup
Waveshare 1.69inch Touch Round LCD Display Module 240×280 Resolution, IPS Screen 262K Display Color SPI and I2C Communication for Raspberry Pi/Raspberry Pi Pico/ESP32S3/Arduino/STM32
KWD 9.500
DSI FPC Flexible Cable for Raspberry Pi 5, Pi5 Display Cable for Suitable for DSI Display Screens, 22Pin to 15Pin, 200mm Length,Black EMI Shielding Film, More Stable Signal Transmission
KWD 3.500
ESP32-S3-Nano Microcontroller Development Board, Based on ESP32-S3R8 Chip, Integrates 2.4GHz Wi-Fi and Bluetooth LE Dual-Mode Wireless Communication Compatible with Arduino Nano ESP32
KWD 5.500
Pi Compute Module 4 Kit Comes with CM4108032-8GB RAM 32GB eMMC Flash with Wi-Fi, with CM4 Heatsink and CM4 Antenna, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac Wireless & Bluetooth 5.0 (CM4108032 Kit)
KWD 54.500
