Product Specifications:
1. Dimensions and pinout same as Nano V3.0
2. Microcontroller: Atmel Atmega328P-AU
3. Architecture: AVR AVR
4. Flash 32 KB, of which 2 KB are used for the bootloader program
5. SRAM: 2 KB; EEPROM: 1 KB; Clock frequency: 16 MHz;
6. USB to Serial Converter Chip: CH340C
8. 8 analog input/output pins: A0 ~ A7 (each pin provides 10-bit resolution)
14 Digital I/O Pins: TX, RX, D2 ~ D13.
1 pair of TTL level serial transceiver ports RX/TX.
6 PWM outputs: D3, D5, D6, D9, D10, D11.
40 mA DC current per I/O pin (I/O pins)
9. Board size: 18 x 43 mm
10. Weight: 8 grams

Product Parameters:
1. Microcontroller: ATmega328P-8-bit AVR series microcontroller.
2. The CH340 chip on the Nano is powered only when the board is powered via USB.
3. The ATmega328 has 32 KB (2 KB of which are used for the bootloader.) The ATmega328 has 2 KB of SRAM and 1 KB of EEPROM.
Power Supply:
1. The Podazz Nano can be powered from a USB-C connection, a 6-12V unregulated external power supply, or a 5V regulated external power supply. The power supply automatically selects the highest voltage source.
2. Input Voltage: 7-12 V; Power Consumption: 19 mA: 19 mA
3. Easy to use - USB-C cables, including USB-C to USB-A cable and USB-C to USB-C cable, C-type ports for power supply, programming and debugging.

Inputs and Outputs:
1.Each of the 14 digital pins on the Nano can be used as an input or output using the pinMode(), digitalWrite(), and digitalRead() functions. 2.Some pins have specialized functions:
Serial: 0 (RX) and 1 (TX). Used to receive (RX) and transmit (TX) TTL serial data. These pins are connected to the corresponding pins on the CH340C USB chip.

What Will You Receive?
3 x Podazz Nano boards and 1x USB-C cable