Mechanical structure：
The C ring is placed in the groove near the interface end of the lower cover body.
The contact pin and the ground pin pass through the C ring in sequence and put them into the lower cover body.
Close the upper cover body and the lower cover body to complete the assembly of the body set.
The body set and the shell are locked to each other with screws.
The sleeve is fixed on the end of the shell with screws.
Screws with the finished products.
(4/3mm 4 screws per each.)
Material：
Contact Pin: Tellurium Copper(#C14500 / copper contains over 99%)
Ground Pin: Tellurium Copper(#C14500 / copper contains over 99%)
​ C Ring: Phosphor Bronze(C5441)
Body: Glass fiber reinforced nylon (Red / White)
Shell: Brass alloy (#C3604)
Sleeve: POM
Screw: Iron
Finish：
ARP-1512G
Contact Pin: 10u" Gold plating (no nickel base)
Ground Pin: 10u" Gold plating (no nickel base)
C Ring: none
Body: none
Shell: none/ laser engraving
Sleeve: none
Screw: none
Dimension：
Biggest OD 13.9mm
Cable hole
Sleeve is contained in finished product 9.0mm.
Sleeve is not contained in finished product 11.5mm.
Total Length 45.7mm
Packing：
Vacuum Bag(4Pcs/1Set)
Recommend soldering temperature：
Temperature Soldering Iron, please keep 380 °C within 5~8 second.
Temperature Soldering Iron, please keep 360 °C within 9~13 second.
Temperature Soldering Iron, please keep 340 °C within 13~18 second.
Temperature Soldering Iron, please keep 320 °C within 19~25 second.
Product production process comply with RoHS.

more info:
www.aeco.tw