XL-10AH and XL-10AL are respectively the wide voltage version and low power consumption version. This series of modules can achieve the same function as self-locking switches by lightly touching the switch to turn on and off the power. MAX can support the load of switching 10A current, and its power consumption is extremely low in the off state, The XL-10AL power consumption version can support operation at voltages of 3.5-5.5V, with a static power consumption of about 300na in the off state, while the XL-10AH wide voltage version can support a wide range of voltages of 4.5-26V, with a static power consumption of about 1.3ua in the off state. The excellent performance of the module covers the working voltage and current required for most DC loads, and the small volume design will not take up too much space on your device. For the button part, if you want to use other styles of buttons, you can also connect various styles of touch buttons to our switch control board through wires.

Model: XL-10AL/XL-10AH
Working voltage:
XL-10AL: 3. 5-5.4V
XL-10AH: 4. 5-26V
Static power consumption: (sampling test has deviation but is not significant)
XL-10AL: 300na (5V voltage measurement)
XL-10AH: 1.3ua (12V voltage measurement)
Load current:
XL-10AL: 10A (5V voltage test for 30 minutes)
XL-10AH: 10A (12V voltage test for 30 minutes)
Pressure drop:
XL-10AL: 130mv (5V 10A measurement)
XL-10AH: 120mv (12V 10A voltage measurement)

Regarding the load current, XL-10AL can run for a long time at 5V and may be very hot. However, after a 30 minute long run test at room temperature of around 25 ° C, it is not recommended to run for 10A with a voltage below 4V. High current is not recommended to run for 10A with a voltage below 4V, as heating under low voltage can easily burn the module. XL-10AH 10A current is not recommended to run for a long time with a voltage below 7V.