Search

Search

SinLoon Chassis Fan Pressure Regulating Governor, 2 Pin 3 Pin 4 Pin Fan Adapter PWM PC Chassis Cooling Fan Hub，8 Way Splitter 12V Speed Controller with 6 Pin Power Port（8 Way）

KWD 4
Brand
SinLoon
Category
Fans & Cooling
Weight
69 g
Size8 way
– 1 +

Special Features

  • 【1 to 8 PWM Fan Hub】PC fan controller can be connected to 8pcs 2pin，3pin/4pin fans to solve the shortage of mainboard interface.It provide a better power supply solution for PC computer case internal motherboard cooling fans.
  • 【Function】Power interface 6Pin supplies.The governor can supply power to up to 8 fans, and the rotary potentiometer can adjust the speed of up to 8 fans at the same time.(Note:The fan base supports 2Pin， 3Pin and 4Pin fans, and the speed of these three fans can be adjusted.)
  • 【Easy To Use】Chassis fan pressure regulating governor. No Drive, plug-and-play.Can be directly supplied by 12V power, which can reduce the load pressure of the mainboard.
  • 【Widely Compatible】 For 2 Pin, 4-Pin and 3-Pin fans. If the fan does not support PWM speed regulation function, the speed regulation function is invalid. The total current connected to the fan shall not exceed the maximum current value of 13A to avoid damage to the governor.
  • 【Glue Fixation】8 Way Splitter 12V Speed Controller.The thickened glue is used to fix it, which has strong adhesion, easily fits inside your pc case and can firmly fix the fan hub inside the chassis.

Description

Features:
1.This 8-way fan hub is suitable for PC desktop computer case.
2.Space Saving: It will save your space effectively and make the cable management easier, and make the inside case neat and tidy.
3.Material: Metal & Plastic
4.Supply Voltage: DC 12V
5.Maximum Current: 13A
5.Power Supply Interface: 6Pin (2 * 3) interface
6.Number of Fan Seats: 8Pcs
7.Package:1 x 8 Channel Hub of 2Pin， 3Pin and 4Pin Fan
Installation method:
1.The adhesive pad at the bottom of the governor can be bonded and fixed in the chassis.
2. Holes are made on the chassis according to the size show in the figure, and the potentiometer can be fixed in the chassis hole through nuts.
3.Set the screw column on the chassis according to the size of the fixing hole of the circuit board as shown in the figurde, and fix the governor on the screw column.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}