This Arduino-Compatible ATmega328P development board has all of the features of the original Arduino Uno with the added benefit of an ISP header and CH340G USB interface.
This development board can be programmed over a USB B cable using the Arduino IDE: Just plug in the board, select "Arduino UNO" from the board menu and you are ready to upload sketches.
You can power the Board over USB or through the barrel jack. The on-board power regulator can handle any input voltage on the barrel jack from 7 to 15 Vdc.
Arduino Compatible ATmega328P Development Board Specifications:
ATmega328 microcontroller with Bootloader Installed
USB Programming Facilitated by the CH340G
USB-B Connector
Input voltage: 7-15V on barrel connector, or USB power
0-5V outputs with 3.3V compatible inputs
14 Digital I/O Pins (6 PWM outputs)
6 Analog Inputs
ISP Header
32k Flash Memory
16MHz Clock Speed
All SMD Construction
R3 Shield Compatible
Package Includes:
1x ATMEGA328P Arduino Compatible Micro-Controller Board
1x 20cm Shielded USB-B Cable
1x 40-Pin Header Strip
Link to online specifications and usage documentation