micro usb for Panasonic(ZW-CTIA-002) release cable
for ziyun Stabilizer for Panasonic Camera Connection
1) Suitable for stabilizer model: for Zy stabilizer (CRANE2, CRANE,CRANE-M, CranE-PLUS)
2) Support functions: photo, focus, video (the camera should be adjusted to video file can be)
3) Applicable camera model; GH2,GH3,GH4,GH5,GH5S,GH6,GH7,S1,S1H,S1R,S5,S5II,s5m2xs,G9,G95 G90,G99,G85,GX7,GX8,GXL,DMC-FZ(20/20K/20S/30/30K/30S/50/50K/50S/100/150/200/1000/2000),G1,G2,G3,G5 G6,G7,G10,GF1
4) Operation and usage steps:
01: Insert the Micro usb terminal into zy camera control interface, and the TRRS 2.5mm plug into the shutter release jack of the camera. REMOTE" Up. , turn on the stabilizer power, then turn on the camera power.
02: Then select the camera manufacturer -panaso on the CRANE2 display as follows: Press the large disc on the stabilizer under the "MENU" - Camera-panASO, then turn off the camera power and turn it back on, you can control the function crane2 operation Please refer to the video presentation on the main image.
03:CRANE,CRANE-M,CRANE-PLUS stabilizer Settings: （The first generation stabilizer is troublesome to set up, please be patient.）

A- Search, download and install forzhiyu app (ZYPLAY) in the App store by mobile phone
B- Turn on Bluetooth on your phone, go to the APP, and select your stabilizer model (CRANE/ Crane-M/Crane-puls) from the list in the top left corner of the APP Three choices in turn) can be connected to indicate that the choice of the right model

C- Then go to the Settings page (grey page) - click on the 3 little dots - go to the PTZ screen - click "More" - it will appear - "Camera. Manufacturer "- Select for" Panaso ", exit the phone, then click/double click the power button on the stabilizer to control the camera to take pictures, camera out Move to the video file and double-click to control the video recording

5) When adjusting the camera to video, press the red button to control the video.
6) Line length: about 30cm, weight 20g.

7) This cable is the shutter release cable and functions as the shutter release button on the camera.
8) The shutter release jack for Panasonic cameras is remote- most camera models are above the SD card in the same position.
9) If it does not work, please rotate the plug