Highspeed powder machine is a necessary tool to ram the herbs. It is 49 times stronger than the traditional motor in working efficiency.This machine adopts ultra highspeed motor, can quickly smash all kinds of dehydrated food, rice, corn, sesame, soybean, fish feed, pepper, herbs (such as ganoderma, licorice, tianqi, pearl etc), usually smash the herbs into the powder for no more than a minute.This machine is suitable for dispensary, herbs processing factory and powder processing.StepsStep 1: Open the top cover (clockwise, counterclockwise).Step 2: Pour the dry material into the crusher.Step 3: Close the lid.Step 4: Plug in the power and turn on the switch. Step 5:When the sound is stable, the smash has been completed.Step 6: Turn off the power, open the top cover, and pour out the crushed material.Step 7: Finish, clean with a brush.Precautions:1. The pulverized material does not exceed half of the pulverizing tank. The height of the comminuted material is not lower than the blade.2. The pulverized material should be kept dry and free of moisture and grease.3. When starting, if the blade is stuck by the crushed material and the motor can't run (beep), please cut off the power immediately to avoid burning the motor, then remove the block, check the fuse and restart the machine.4. Smash the hard drug into a powder for 12 minutes. Do not operate the machine for more than five minutes in a row for a long time. You can use the unit at intervals.5. Do not wash the machine with water. You can clean the machine with a damp cloth or a brush.6. Do not open the top cover or shake hands when using.7. If the motor is not running, you must turn off the power.8. Regularly check that the blade is secure and that the set screw is stable.