REDDING COMPETITION BULLET SEATING DIE FOR HANDGUN: This Redding Competition Bullet Seating Die features a very unique way to bias the bullet into alignment with the cartridge case. The precision fitting, spring loaded seating stem is allowed to move down into the chamber of the die, aligning the bullet and cartridge case well in advance of bullet seating. Precise alignment is then maintained as the bullet and cartridge case move upward until seating is accomplished. This Patented System assures you of the best possible bullet alignment. The micrometer is calibrated in .001" increments to simplify setting and recording bullet seating depth. This no compromise die has no crimping capability. The industry standard 7/8 - 14 threaded die bodies are slightly extended to allow full thread engagement of the lock ring. An oversize bellmouth chamfer with a smooth radius has been added to the bottom of the die to ease case and bullet entry in progressive presses. MAIN FEATURES: - Patented System of Bullet Alignment; - Micrometer Adjustment; - Separate Crimp; - Progressive Press Compatible.