Search

Search

Repa Market 4 Inch Round Saddle Take Off - 3 Inch Outlet - 90 Degree Splitter - Galvanized Steel, Gray

KWD 5.500
Brand
Repa Market
Category
HVAC
– 1 +

Special Features

  • Pressed round ventilation saddle take off for a 6 Inch duct . Outlet branch extension with diameter to fit a 4 Inch duct divertion. 90 degree angle. Made from quality galvanized steel.
  • Used as an element for ventilation T-piece production or as a way to branch a circular duct, semi-rigid ducts or flexible sono duct off the main duct run. Saddle branch extension has air tight rubber gasket for better fit.
  • When the system is designed with a main duct branching into many subsidiary branch ducts, take-offs allow a small portion of the flow in the main duct to be diverted into each branch duct.
  • Assembly - Place the saddle on the duct in the area where you will want it to be installed and then mark both inside and outside lines of the saddle with a marker. Drill a hole in the marked inner area and cut around with an angle grinder, jig saw or tin snips. To fit the saddle you will need to put a bead of silicone around the cut and place the saddle on top and apply pressure. To secure it we would recommend tek screws and another bead of silicone if required.
  • This will provide a good solution if you have no possibility to move the existing ducts. If you can remove the ducts, and reinstall with a T shape coupler, visit REPA MARKET store. We offer various solutions for most ducting connections.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}