All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
0.91 inch OLED display with a resolution of 128 x 32 and a viewing angle greater than 160°. It supports a voltage range from 3.3V to 5V DC, with a normal operating power consumption of 0.04W and a power consumption of 0.06W when the screen is fully lit.
The I2c OLED display module uses an SSD1306 embedded driver IC and communicates via the I2C/IIC interface, requiring only two I/O ports.
The OLED display module is compatible with Raspberry Pi, Beagle Bone Black, Arduino Nano, UNO, R3, Mega, 51 MCU, and STM 32.
Raspberry Pi screen module does not require a backlight and has an ultra-high contrast ratio, making small fonts clear and easy to read. There are no embedded fonts in the module, users can create fonts using font generation software.
The module pins are soldered and housed in a small bag to prevent them from falling off during transportation.
Arducam Mini 8MP IMX219 Camera Module for Jetson Nano/NX and NVIDIA Orin NX/AGX Orin, with Low Distortion 105°(D) FOV M12 Lens, Compatible with Raspberry Pi CM3 / CM3+
KWD 10
DAOKI 2Pcs Screw Shield V2 Expansion Board Terminal Compatible with Arduino UNO R3 with Dupont Cable Female to Male
KWD 4.500
waveshare 1.54inch E-Ink Display Module Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH/Zero 2W Series Boards 200x200 Resolution Three-Color SPI Interface
KWD 8.500
Comimark 3Pcs TP5000 3.6v/4.2v Charger Module 3.7v Lithium ion 3.2v LiFePO4 Battery Charging
KWD 12
