In an aquascaping tank, all the landscape designs and plant layouts are essentially poor imitations of nature. We are always striving to mimic nature while being tired of the visual distractions caused by equipment—these visible devices ruin the meticulously crafted work of aquascapers and reduce the overall completeness of their creations. But now, the Glass Lily Pipe Inflow and Outflow solves this problem with the following advantages:
1. Stable material, suitable for both freshwater and saltwater tanks.
2. Almost invisible, allowing maximum viewing angles and enhancing the perfection of your aquascape.
3. The trumpet-shaped outflow offers multiple benefits: oxygenation, surface ripples, and a gentle current that is plant-friendly.
What makes LINLAN's Glass Lily Pipe Inflow and Outflow unique?1. Minimal diameter loss at every bend.
2. If you choose an inflow pipe with a skimmer, we've adjusted the skimmer regulator to avoid constantly blocking part of the intake slot, improving water flow efficiency.
Rinse the skimmer with tap water. Its surface may have a release agent, causing a hydrophobic effect that makes rotation and adjustment difficult. If you skip this step, the acrylic skimmer might take some time in the aquarium to reach optimal rotation. Don't worry, this is harmless, and algae and microorganisms will make it easier to rotate and adjust.
Ensure the inflow pipe is vertical to the ground with no lateral force. Additionally, the glass pipe should be parallel to the aquarium's side. If lateral force is applied due to the filter hose, use the provided suction cup clips to secure the hose.
Rotate the flow control valve at the bottom of the inflow pipe to reduce the intake from the lower grid and increase the suction of the top skimmer.
Gently press the acrylic skimmer, allowing water to flow through the grid. When you release your finger, water should flow into the grid. If no water flows, try further reducing the lower intake or increasing the filter pump's power.
If there is still no water flow through the skimmer after step 3, it indicates that the pump power is insufficient. Consider replacing the pump with a higher-powered model or lowering the water level. Since filter hose setups and pump heights vary between aquariums, we cannot specify a minimum required pump power, but we ensure that most mainstream canister filters and pumps can effectively drive the skimmer, typically with enough extra capacity.
If water flows through the skimmer grid but the skimmer does not rotate, consider adjusting step 2 or try resetting after some time.
Monitor closely for the first 30 minutes to prevent any abnormal suction of aquarium inhabitants.
If the skimmer does not rotate but water flows through the grid, the skimmer is functioning properly and effectively removing oil from the aquarium surface. You can contact us for help and adjustment advice.
When disassembling, wear gloves: Hold the bent part for a better grip on the glass pipe.
Gently move the hose back and forth and try to rotate the hose.
If step 2 doesn't work, try using a tool to gently pry the hose at the connection, creating a gap, then repeat step 2.
In any case, the hose should be removed by twisting. This is the safest and most logical way.
Use the provided pipe brush for cleaning. If you have spare inflow and outflow pipes, you can soak the glass part in a disinfectant solution (such as bleach) for 24 hours (make sure to remove the acrylic parts and take protective measures), which will restore it to its optimal state.