Why choose a Airbrush kit?
; With the cordless airbrush, you will be able to use it anywhere then without worrying about being too bulky to carry,
; it's not just a painting tool, You can use the air brushes to create a wide variety of artistic works on nails, models, cake, food, T-shirts, canvas and a multitude of other surfaces. Airbrush Kit Warm Tips : Due to transportation and storage time, after receiving the instrument, please fully charge before use, charging display red light, full charge display green light. Please do not use the airbrush while charging.
; Before use, please test the cordless airbrush with water to make sure that the airbrush gun is not blocked.
; When spraying is finished, please use the cleaning brush to thoroughly clean the airbrush cavity, nozzle, and liquid cup in time.
; The solvent-based paint needs to be diluted with a thinner, otherwise it is difficult to spray. But in the case of water base, it can be used normally without dilution.
; If the paint and liquid are too thick or encounter the problem of not being sprayed, suggest properly dilute it with water.
; If you use the airbrush for makeup, please use a water-based liquid foundation instead of an oily liquid foundation. You need to use a special foundation for the airbrush, otherwise it will block the nozzle.
; If the airbrush can't spray liquid, it may because the fluid control knob is too tight or the nozzle is blocked. Please try to adjust the fluid control knob or clean the nozzle with alcohol or detergent.
; Airbrush Kit
; Airbrush Kit
; Package List:
; 1 × Airbrush
; 1 × Extension tube
; 1 × Dropper
; 1 × 20CC Plastic cup
; 1 × 40CC Plastic cup
; 1 × 0.3mm Replaceable Nozzles
; 5 x Spray Gun Cleaner &Wash Needles
; 1 × Type-C charging Cable
; 1 x User manual
; Airbrush Kit
; How to spray:
; Install the gun on the air pump.
; Fill fluid in the cup after thinning appropriately.
; Short press the ON/OFF switch on the compressor. The airbrush will get air fluid at this time.
; Align the area to be sprayed, the distance is 2-3cm, move the trigger backwards slightly, spray he atomized paint, then move the airbrush back and forth.
; MAINTENANCE:
; Empty the fluid cup and wash with water or solvent by a brush.
; Refill cup with water or solvent, then block the needle cover with a finger and spray.
; The air flows backward into nozzle to clean the paints remained the airbrush.
; Dry the airbrush to avoid stains or rust, convenient for next use
; Tips: Please use mineral water, because tap water and spring water contain more impurities, causing the formation or spray of water droplets.
;