HinchJone offers high-quality female Indian head avatar embroidery/ironing embroidery accessories on the patch, and the kit is 2 pcs patches.
You will receive high-quality decorative patches and quick response services.

Description:
1. Keep the back clean before ironing and adjust the temperature to suit the temperature of the clothes according to how the iron is used.
2. Place the cloth in the position where it needs to be ironed, then use the iron to back and forth on the rubber side. It usually burns for about 10 seconds.
3. To prevent burns, you can put a thin piece of cotton on the cloth (must be a cotton jacket, not a faded cloth).
After ironing, check the edges for burns and burn them a few times at the edges.
4. It is necessary to determine the temperature by the thickness of the applique. If it is thicker, it must have a higher temperature and a longer ironing time.
For particularly thick fabrics, you can burn a few times on the back.
5. Special Note: For sequins or brighter surfaces (because the sequins are plastic), be sure to lay a layer of cloth and iron at low temperatures (below 130 °C) or use a steam iron directly.
Or put a layer of damp cloth on top. In order to avoid excessive temperature, the plastic sheet will melt.
6. The best way is to use a needle thread to sew a few stitches on the side of the fabric after ironing. This is more determined and very compliant.