Electraic Fuel Pump: Model: HEP-02A; Material: Copper Clad Aluminum; Voltage: 12V; Current: 2A; Output Pressure is 3-6 psi, Pressure : 0.032-0 .045 MPA; which can reach 80-100 (liters/hour) per hour, and the oil absorption capacity is strong enough to ensure the supply of fuel.
In-line Fuel Pump: Fits 5/16 "oil pipe, 5/16" Joint or connector at each end, transparent plastic shell, orange inner filter, with metal brass end caps on the top and bottom of the filter, filter out impurities and precipitation in gasoline, reduce parts wear and protect the engine, direct installation, simple and convenient.
Wide Application: The kit fit all 12 volt Cars (such as -Toyota, -Ford, -Honda, -Mazda, and any other suitable car), trucks, boats and generators, lawnmower.
Fuel Line: The wall thickness is 3.2mm.The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread.Oil resistant, cold-resistant and ethanol tolerance.
Package Include: You will get a universal 12v (3-6psi) electric fuel transfer pump + 2m/79 inch reinforced fuel pipe + 5/16 inch fuel filter + 10 hose clamps.
LanHong 2 Pin Way 16 AWG Car Waterproof Electrical Connector Plug with Wire AWG Marine Pack of 5
KWD 4
-22%
TYC 3794 Condenser Assembly Compatible with 2011-2016 Chevrolet Cruze
KWD 26
DC 4.5-30V 10Amp Blinking Flasher Module
KWD 8.500
Marine Fuse Block 12v Fuse Box: 12Way Boat Fuse Panel 12v Power Distribution Block with LED Warning Indicator Waterproof Cover 12 Circuit Terminal Block with Negative Bus 12volt Automotive Fuse Holder
KWD 9.500
