Search

Search

-14%

Engine Hood Hinge Ditch LED Mount Brackets for Auxiliary Offroad Pod Work Light Holes Diameter 1 inch Fit Cowl Panel at Windshield Base for Toyota Tacoma 2005-2015

KWD 4.500
Brand
Collgene
Weight
321 g
– 1 +

Special Features

  • Easy to install. No mods. No drilling needed; Requires only a wrench or socket for installation
  • Sturdy built with thick metal, ensures it a stable mount without vibration while driving. Sold as a pair (Driver & Passenger side); May be used for CB Antenna or Whip Flag
  • Does NOT affect the opening or closing of the hood while the lights are mounted
  • To install, remove bolt closest to front bumper, attach mount with other hole offset, replace/tighten that bolt, remove rear bolt, swing mount over into place, replace bolt and tighten. Doing it this way keeps the hood from shifting around so you don't have to readjust it in relation to latch
  • Perfect Fitment: Work perfectly with small pod lights work lights within 2” to 5” and sit at exact position, remaining sufficient clearance for hood to fully open without blocking windshield wiper

Description

THESE GO BETWEEN BOLTS AND HINGE!
To install, remove bolt closest to front bumper, attach mount with other hole offset, replace/tighten that bolt, remove rear bolt, swing mount over into place, replace bolt and tighten. Doing it this way keeps the hood from shifting around so you don't have to readjust it in relation to latch.Durable Coating: Made of quality powder coating, no fading or chipped paints, anti-rust
Ditch Light Mounting Brackets:
Size: 2.75” X 8.1”
Light mount hole size: 10mm
Hood mount hole size: 12mm
Metal Thickness: 3mm
Finish: Black powder coating

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}