Package included : Rubber front coil spring boosters.

Size : 1.85 x 1.56 x 1.24 inches.

Material : Rubber.

Color : Black.

Instructions :
Raise the front end of the vehicle to unload the springs.

Refer to your vehicle owner's manual on the proper placement of the jach stands.

Determine the required amount of the lift.

The boosters have two positions for different hight requirements :
One position will provide a 1 inch (2.5cm) lift and the other a 1.5 inch (3.8cm) lift.

Inserl the booster between the coils of the spring.

NOTE :
If needed, use a hammer to slightly top the booster into place between the coils.

Insert the second booster between the coils at a 45" angle from the other booster.

(See diagram) Repeat for the second spring.

Lower the vehicle and make sure that all parts have proper clearance.

Also mahe sure that the vehicle is at a equal ride height and that the boosters are firmly installed.

After 100 miles (160 km) of driving, review the booster placement to onsure proper porformance.

DANGER :

Risk of vehicle damage,serlous injury or death.

Improper installation will resull in operation failure or loss of vehicle control.

Always refer to vehicle awner's manual for proper lift points.

Be sure to use jach stand or other means to fuily fupport the vehicle.

Collapse of vehicle onto a persor will result in injury or death.

NOTE II :
Manual measurement, please allow slight deviation in size.