1. It is a bypass module to release the chip key, universal and design, it has stable performance.
2. Bypass immobilizer chip on OEM key or fob to support remote start, car alarm, engine on/off button and key duplication.
3. This module only compatible with most chip key cars. It does not apply to other immobilizers.
4. Simple two‑wire connection, easy and fast to install, no need of complicated operations.
5. If your key is larger than the box of this unit, please take out the entire chip or PCB from the box.

Spec:
Item Type: Immobilizer Bypass Module
Material: ABS
Power Supply Voltage: 12 (V)
Working Temperature: -20-80 (℃)
Application: Suitable for 12V cars
Description:
When the modified vehicle has a chip inside the remote control, the original car computer will detect the chip data in the car key at the moment the vehicle is started. If the data is correct, the ignition can be started successfully, otherwise it will not start. (For home use: You can put the original car remote control or the chip inside the original car key into the avoider box, and transmit the chip data to the coil of the original car key ignition lock through the induction coil)
How to install the bypass module?(Please note a spare key is required to inside the Box, if your original key is too big, please open it to get the chip unit )
Some cars have RFID car key (chip key), if you want to remote start car, you need to have a bypass module, otherwise the car engine can't started.

How to Use:
1) Remove the key screws of bypass module control box, open the control box;2) Insert the OEM car key or key PCB or Key chip under the wire;3) Lock the locker and press the wires close to the remote key, or key PCB or Key chip;4) Tighten the screws and lock the case;5) Circles the sensing the wire on the OEM car key socket(circle more circles can enhance the ;6) Fasten the sensing wires to the car key