Specifications:
Light Color: Red,White,Amber
Led Quantity: 864pcs(288pcs Red SMD + 288pcs White SMD + 288pcs Amber SMD)
Input Voltage: DC12V
LED Power: 6W
LED Strip Light Dimension: 60"x 0.79"x 0.39"
Foldable Length:30.3inch(77cm)
After Splicing Length 60.2inch(153cm)
Material:ABS shell+SMD LEDs+glue
Waterproof Rating: IP67
Working Temp: -20°F to 170°F
Plug-n-Play: 4-Pin Trailer Adapter with Backup wiring
Long Lifespan:over 50000 hours
Features:
Universal fit for any vehicles with 60 inch tailgate.
Features full functions of brake, turn signal, running, reverse and strobe light.
The Triple-row tailgate light emits low Red for running, Bright Red for braking, Amber for left/right turning signals, White for reversing, and Flash Amber for emergency strobe light.
With triple row LED chips and a total of 864 SMD 2835 LED chips with high quality,the led light bar delivers powerful & brighter illumination.
IP67 waterproof,great for heat dissipation & is durable,chemical corrosion resistance,can resist any harsh weather and environment.
Easy Installation,no need to drill, just peel and stick.
Wiring Installation:
White Wire：Ground
Brown Wire：Right Turn Signal&Brake Light
Yellow Wire：Running Light
Green Wire：Left Turn Signal&Brake Light
Yellow+Green Wire：Sequential Strobe Light
White Wire：Reserve Light
Installation Steps:
1. Unhinge and removeyour vehicle's tailgate.
2. Clean the surface thoroughly and make sure no dint or dust or it will reduce the strength of the adhesive tape.
3. Pime the area with the adhesive tape brackets providedin your kit.
4. Peel off the protective film from the back of tailgate light strip.
5. Apply the strip left to right and press it fimnly on the tailgte for 30 seconds every 12 leds.
6. Finaly test the tailgate light acain to make sure no wires loosing during installtion.
⚠Note:For some vehicles that can't work normally,please connect 4-way flat connector wire harness included to flat 4 pin connector on strip light,then connect wires to exixting truck wiring.