Handmade Ceramic Incense Burner & Censer This item sending with one pcs stickholder. This unique piece of craftsmanship is created by shaping clay by hand, resulting in distinctive textures and colors achieved through special glazes that crack, disperse, and flow when fired in the kiln twice. While they go through the same processes, no two products are exactly alike. Due to their handmade nature, there are variations in dimensions, forms, and the distribution and appearance of the glaze that imparts color. This uniqueness makes each product one-of-a-kind. You can see samples from the product to be sent in the other photos of the product. Measurements: Can be changed +1 cm or -1 cm ( all item was handmade so measurment can be changed) Height:14 cm Diameter :13 cm Usage as an Incense Burner First, remove the reservoir from the product's chimney. Ignite the incense and after burning for a duration depending on the type of incense, extinguish it, then place the smoldering incense inside the incense burner. Placing a non-burning incense stick as a support in the incense burner is recommended, with the burning part of the incense facing upwards, for better performance. Usage as a Censer First, light a candle and place it in the lower compartment of the censer. Position the reservoir over the chimney on top. Add water to the reservoir first, then add 1 to 5 drops of essential oil according to your preference. When the water in the reservoir evaporates, the candle must be extinguished or more water should be added. Safety and Cleaning When incense or a candle is lit, the product will heat up. It is designed with legs to prevent damage to the surface it's placed on. Avoid touching the product while it's hot and keep it away from flammable or meltable objects. The product can be cleaned with water and soap. Cleaning should be done when the product has completely cooled down. The accessories of this model chimney have been sanded due to the special glaze applied and a more solid stance has been achieved. Note: This price does not include the palo santo stick in the images