👍Fitment List: Fits the following Non-ABS models with a 12" handlebar: 2014-later Touring Street Glide, Electra Glide, Road Glide, and Road King.
👍Extended Length: The extension front brake line kit is +2" longer than stock to fit your taller 12" rise handlebars or risers. The upper housing length is about 30 1/4", and the caliper lines are about 17 1/4" and 21.5" long. Our brake lines exceed OEM pressure specifications, reduce brake line expansion, and look great.
👍Quality You Can Trust: Our stainless steel braided brake cable creates this good look without any damage to the areas where the cable touches & keeps unwanted moisture out of the line. The PA Inner core hose & outer PVC protect layer & stainless steel braid for smooth fluid transfer and high strength.
👍Better Work: With Advanced Technology and Workmanship, our hydraulic brake line hose will greatly improve your braking effectiveness because there is almost no expansion under pressure, requiring less force to operate at its maximum. The brake lever feel stays firm (less squishy than rubber hoses) at all times. This advantage reduces braking distances and increases the efficiency of the calipers.
👍Easy to Install: Just need you to remove the stock/old brake cable without damaging the motorcycle, then follow the same route/steps to install the new brake line, then all done. Note: some of the buyers' motorcycle needs a longer cable than a normal length because of the different cable routes(such as some motorcycles' route requires a turn). And please find a professional mechanical person to install it if you do not know how to install the product, thanks.
❗Note: After installation, please remember to use a professional brake bleeder kit to bleed the brake system to eliminate the air bubbles.(Please find a professional mechanical person to bleed the brake system if you do not know how to complete this process, thanks)
👍Package List: The package includes 1 * Front Brake Line Kit as shown in the picture, with no instructions. If you have any questions, please feel free to message us via AMZ message, thank you.
Description
Fitment:Replaces H-D OEM 41679-09.Fits the following Touring Non-ABS models with a 12" handlebar: 2014-later Street Glide, Electra Glide, Road Glide, and Road King.Features:Condition: 100% Brand New.Material: High-class quality upgraded steel braided.Reference Steps of Bleeding the Brake System:After installation, you are going to bleed the brake system.Step 1. Remove the master cylinder cap, be careful doing so if they'are full though they will tend to spill on you. Step 2. You always work the caliper furthest away from the master cylinder, so the master is on the right side, you are going to go to the left side of the front caliper and bleed that side first.Step 3. You need to use a professional brake bleeder kit to start bleeding.(You might have to do these brake system bleeding steps two times do each side twice, because once you believe the other side of course the lines are connected and there could be a bubble getting right in between there.)Package:1 * Front Brake Line Kit as shown in the picture, with no instructions.NOTE:Please MSG us if you have any problem with the product, then we will offer good solutions, thank you.