This siphon pump allows you to quickly and easily transfer fuel, water, or other liquids from one container to anotherp> The rubber squeezing pump generates rapid suction and starts the siphonp> Used for storing and easily removing liquids from car radiators and fuel tanksp> Two elastic PVC transparent tubes are suitable and approved for use in petroleum based applications. Pure copper interface, resistant to gasoline, can avoid corrosionp>
Material: Rubber
Joint: Pure Copper
Usage:
1. Take both ends of the tube with one hand, and continuously clamp the black suction airbag with the other hand to tell the wind blowing head that the head is the oil outlet, and if there is no gas blowing out, the head is the oil suction port.
. (Identify oil port)2 Place the air inlet into the fuel tank and insert the air outlet into the oil barrel, controlling the distance between the pipes and the height difference between the air inlet; (The tube is thin enough to reach the fuel tank of most cars. The tube is transparent, soft enough, and can control water flow.)
3. After the step, it is important to note that when you need to hold the oil outlet with one hand, just start smoking and squeeze the intake airbag with one hand. If gas is sucked into the cross-sectional tube (air inlet to air) and gasoline will follow the flow tube to the water tank, there is basically no need to directly rub the airbag.)p>
Reminder:
It is necessary to extract oil from the car's fuel tank
1 There is no oil extraction filter in the fuel tank
2 When pumping oil, the pipeline should be inserted into the mailbox
Including:
1 * Soft hose liquid transfer manual silicone suction cup pump