The oil filter cutter FIT filter cutting range of 1-3/4" to 5-3/4"

This tool consists of a main body, a roller, an adjustment lever, a blade and a blade stand. The functions of each component are as follows:

Adjustment Rod: Turning the lever clockwise translates the blade toward the roller, and turning it counterclockwise moves it away from the roller.
The Rollers: Fixing the filter and it does not hinder the rotation of the filter.
The Blade: Touch and cut the filter housing.

How to use this oil filter cutting tool?

This filter cutter is very simple and convenient to use, the specific steps are as follows:

Step 1: Put the oil filter to be cut on the working platform of the tool, and then rotate the adjustment lever to fix it. (Note: Do not tighten the adjustment lever too tightly, otherwise the oil filter will be difficult to turn, just fix the filter and make contact with the tool blade)
Step 2: Turn the filter around and around, and when the filter feels loose contact with the tool blade, tighten the adjustment lever slightly. Then repeat the above operation until the filter housing is completely cut out.