Search

Search

2PCS 12V/24V Fixed Thread Cigarette Lighter Socket to O Ring Terminal Cord,20A 14AWG Waterproof Cigarette Lighter Female Socket Replacement Cable,8mm Ring Eyelet Terminal-1FT

KWD 4
KWD 5
Brand
HATMINI
Weight
151 g
– 1 +

Special Features

  • Fixed thread 12V-24V cigarette lighter socket 20A heavy-duty cable, pure copper O-shaped terminal inner diameter 8.3mm (about 3.26 inches), input voltage: 12V or 24V, output voltage: 12V or 24V, output current: ≤20A
  • Car Female Cigarette Lighter to O Ring Terminal 2.0 Sq. Cable (Approx. 14AWG), red wire is positive, black wire is negative, built-in 20A fuse, two 20A spare fuses are included
  • 12V Fixed Thread Cigarette Lighter Socket, with waterproof and dustproof cover, which can be covered when not in use to prevent dust and water from entering the socket, keep the device clean or dry, and effectively extend the service life
  • The 12v cigarette lighter replacement socket widely supplies power to vehicles, inverters, and car refrigerators. It is suitable for air compressors, inverters, trucks, motorcycles, RVs, boats, etc.
  • Package contains: 2 piece cigarette lighter socket cable (built-in 20A fuse), 2 pieces spare blade car 20A fuse

Description

HATMINI 12V fixed thread cigarette lighter waterproof socket 14AWG heavy duty replacement extension cord

Cigarette lighter replacement socket, with threads, can be fixed in the desired position, with dustproof and waterproof cap

Pure copper eyelet terminal inner diameter 8.3mm (about 3.26 inches), red wire plus car battery positive, black wire car battery negative/GND, easy to use

Built-in 20A fuse, equipped with 2 pieces of 20A fuse, triple insurance

Suitable for 12-24V vehicle power supply equipment, such as marine vehicles, air compressors, inverters, trucks, motorcycles, RVs, boats, etc.

Specifications:
Cable: 2.0 Sq/14AWG
Red cable: positive level
Black cable: negative
Total length: 0.4M/1.2FT (including socket part)

Installation method:
1. Remove the locking ring towards the cable

2. Place the waterproof cigarette lighter socket into the installation hole (recommended installation hole size is 1.15in/2.9cm--1.35in/3.45cm)

3. Tighten the locking ring along the thread direction

4. Weld or install the tail O-shaped terminal

Note:
1. This product is only used as a power socket. No lighter function!
2. Please do not operate with power on

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}