The Clutch Holding Tool is made from hardened carbon steel for durability and longevity with hardened jaws. The tool prevents the clutch from turning while you remove the basket nut. The device holds the inner hub so you can remove the large nut that holds everything together, and not risk harming the inner clutch hub.
The Clutch Holding Tool is used to hold the inner clutch hub, which is necessary for removal and installation of the clutch hub and clutch basket.
Can also be used to hold flywheels, sprockets, gears, etc.
Adjustable jaws open up to 5"/12.7 wide, Total length is 11.6"/29.5cm, are recommended for square tooth style clutch hubs.
Recommended for square tooth style clutch hubs, not for V-groove or semi-circular clutch hubs, and not for clutch baskets with reverse internal clutch hubs
BTSHUB 52-in-1 Custom Bushing Driver Set Transmission Wheel Axle Bearing Race and Seal Installer Remover Tool Kit
KWD 23
BTSHUB O2 Oxygen Sensor Socket Set, 7pcs Automotive Sending Unit Master Sensor Socket Set, 3/8" Drive & 1/2" Drive
KWD 12
BTSHUB Car 14.5"/368mm Steering Wheel Holder Stand Tool Wheel Alignment System Tool
KWD 11
BTSHUB 19pcs Front Wheel Hub Drive Bearing Removal Install Puller Tool Kit Universal
KWD 26
