Search

Search

LS Standalone Wiring Harness for LS SWAPS Engine DBC 4.8 5.3 6.0 1997-2006 LS1-4L60E Stand Alone Wire Harness Drive by Cable LS1-4L60E 60A Relay

KWD 31.500
Brand
Nakkaa
Weight
2.7 kg
– 1 +

Special Features

  • Compatible with LS1 4L60E 2003-2006, suitable for 03-06 all using 4L60E(Vortec engine 4.8 5.3 6.0) transmission.
  • This harness is a 3 wire MAF and a 1 wire alternator. For drive by cable throttle body Only.This LS1 standalone harnesses are designed for installing these new GM EFI engines into your ride, whatever it may be.
  • A grommet is installed on the wiring harness, including wires and the design of the sliding bellows sealing ring, improves the long lasting of the wiring harness and allows professional leak proof installation.
  • Easy to Install: These harnesses are designed for '97 - '06 Vortec retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles.They are completely plug and play with switched power, constant power and ground connections required.
  • Package Content: 1x Complete for LS1 4L60E wire harness. (If you want to use this for 4L80E, you need to buy a 4L60E to 4L80E adapter separately, which is not included in the package.)

Description

LS Standalone Wiring Harness

Fits following vehicles:
Compatible with 1999-2006 Drive By Cable LS1 Engines.
Compatible with 1999-2002 Camaro/Firebird, 1999-2004 Corvette (DBC ONLY), 2004 GTO, 2003-2006 CTSV.

Connections From Our Harness You Will Need to Hookup:
Fuel Pump (Required)
Switched Ignition (Required)
TCC Brake Switch (Converter Control – Required)
Malfunction Indicator (Check Engine, MIL, CEL, ETC.)
Speedometer
Tachometer
Fan 1 Relay Control (Low Speed or Single Control)
Fan 2 Relay Control (High Speed or Second Fan Control).

Connections Included in this Standalone Harness:
Throttle Position Sensor
Idle Control Valve
Coolant Temperature Sensor
Alternator/Generator
All 8 Injectors with EV1 Injector Connectors
Bank 1 Coil Harness Connector
Bank 2 Coil Harness Connector
Knock Sensor Harness Connector
Camshaft Position Sensor
4L60e Transmission
Speed Sensor
Bank 1 Upstream
Bank 2 Upstream
IAT (Only If using a 3 Wire MAF)
Crank Position Sensor
A/C Pressure Sensor
OBD II Port (DLC Port)
Single Harness Ground
Single Battery Constant Connection.

Notes:
Please check compatibility table, item specifics, part numbers as well as the product description to ensure this is the correct part for your vehicle.
Instruction not included. Professional installation is always recommended.

Package Content:
1x Complete for LS1 4L60E wire harness.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}