Simplified Fitment Application (Please Use Amazon Part Finder at the top of this page, Enter your vehicle detailed information to make sure Fitment):
2002-2010 for Chrysler PT Cruiser
2002-2005 Dodge Neon
1999-2004 Ford Mustang
1986-1995 Ford Taurus
1989-1997 Ford Thunderbird
1995-1997 Ford Windstar
2001-2006 Hyundai Santa Fe
2005-2013 Hyundai Tucson
2002-2005 Kia Sedona
2003-2009 Kia Sorento
2005-2013 Kia Sportage
1999-1994 Lincoln Continental
1993-1998 Lincoln Mark VIII
1989-1997 Mercury Cougar
1986-1995 Mercury Sable
1998 Jaguar XK8
2009 Kia Borrego
Note: Wheel Hub Bearings must be torqued to vehicle specifications to prevent failure.

Installation Steps

1. Raise the vehicle and remove lug nuts and wheel rim.
2. Remove the brake caliper and rotor. Support the brake caliper with an “S” hook or a piece of wire.
3. Remove the axle nut, using an axle nut socket. Follow the manufacturer's instructions for nut replacement.
4. Disconnect the ABS sensor wire from its mating connector point and positioning clips. *Make a note of the proper orientation and positioning of the sensor wire and bearing.
5. Remove the steering knuckle attachment bolts. *You may need a puller to remove the hub assembly. DO NOT damage the knuckle or axle shaft.
6. Remove the old hub, Clean and inspect the steering knuckle. Remove any debris, nicks or burrs using a fine file, wire brush, emery cloth or honing stone.
7. Reverse the above steps and actions to install the new wheel hub back.
*Professional Installer Recommended
*No Instruction