Description:
The high impedance fuel injector has been tested and exactly matches the internal coil resistance and fuel flow rate of OEM fuel injector.

Specification:
O-Rings Included: Yes, preinstalled
Orifice Type: 4 Holes Disc
Manufacture Part Number: 0280158028 04591986AA 812-12138 7B0906031A
Connector Type: EV6
Flow Rate at 43.5psi/3 bar, 22.8Lb/hr, 172.3G/min, 240cc/min
Material: Metal, Plastic
Color: Black
Pin Number: 2
Voltage: DC 12V
Overall Length: 65mm / 2.56"
Size: 65x37x16mm / 2.56"x1.46"x0.63"(L*W*H)

Note:
This installation should be done by an experienced mechanic who has access to a factory service manual and all required tools!
This is a non-OEM product, accessory only!

Fitment:
for Dodge Charger 2.7L 2006 2008 2009
for Dodge Avenger 2.7L 2008-2010
for Dodge Magnum 2.7L 2005-2008
for Dodge Stratus 2.7L 2005-2006
for Chrylser 300 Pacifica Sebring Town Country 2.7L 3.5L 2005-2010
for VW Routan SEL 4.0L V6 2009-2010

Package Included:
6 x Fuel Injector

Installation:
Step 1. Make sure the engine is cool down. Disconnect the battery.
Step 2. Remove the bolts and brackets from the fuel rail.
Step 3. Disconnect the plug on each injector.
Step 4. Lift the fuel rail and remove the injector from the fuel rail.
Step 5. Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes.
Step 6. Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery.
Step 7. Double check for fuel leaks before and after starting the engine.