This V-band Flange and Clamp set for the Turbine Exit (pipe side) on all the T4 flanged 200 and 300 Series Turbos S, SX, and SX-E with the beveled face.
Machined from solid billet 304 stainless means it's extremely durable and corrosion resistant (no rust!).
Welds very nicely to both stainless and mild steel tubing!
Has the special "contoured" flare (For Borg Warner also calls it 4.24" ) to mate to the bevel unique to the only For Borg Warner outlet flange on all these Turbo models.
Has the nice 3" ID on the backside of the flange to slip the 3" (76mm) OD tube into and weld.
If you wish to use this on a 3.5" tube to build a 3.5" pipe, just grind away the step and it's 3.5" ready!
This item fits the following: For Borg Warner Turbo S200 S200-SXE S300 S300-SXE S200SX S257 S366