Applicability: Thermostat Housing For Land Rover Sport LR4 Discovery Velar/Jaguar F-Type F-Pace XF XE XJ AJ126 3.0L V6 SC Engine LR117568 LR107288 Applicable Models: 2014-2016 LAND ROVER LAND ROVER 4 3.0L V6 2017-2020 LAND ROVER DISCOVERY 3. 0L V6 2014-2019 RANGE LAND ROVER 3.0L V6 2014-2019 LAND ROVER SPORT 3.0L V6 2017-2019 LAND ROVER VELAR 3.0L V6 2013-2020 Jaguar XF 3.0L V6 2013-2019 Jaguar XJ 3.0L V6 2014-2020 Jaguar F-Type 3.0L V6 2017-2020 Jaguar F-Pace 3.0L V6 Compatible with Land Rover LR 117568 LR107288. Compatible Land Rover LR 4 2014-2016 3.0L V6 Compatible Land Rover Discovery 2017-2020 3.0L V6 Compatible Land Rover RANGE Land ROVER 2014-2019 3.0L V6 Compatible with RANGE Land ROVER Sport 2014-2019 3.0L V6 Compatible with RANGE Land ROVER Velar 2017-2019 3.0L V6 Compatible with Jaguar AJ813986 AJ814048 Compatible with Jaguar XF 2013-2020 3.0L V6 Compatible with Jaguar XJ 2013-2019 3.0L V6 Compatible with Jaguar F-Type 2014-2020 3.0L V6 Compatible with Jaguar F-Pace 2017-2020 3.0L V6 Installation Steps: 1: Gather all necessary tools, which may include a socket wrench, pliers, screwdriver, and coolant. 2: Open the drain valve and drain the coolant from the radiator. Make sure the coolant is completely drained. 3: Remove the old thermostat housing assembly by loosening the screws or bolts securing the thermostat housing. Use pliers to carefully remove any hoses or wires that may be attached to it. 4: Clean the area where the old thermostat housing assembly was located. Remove any residue or debris that may interfere with the proper installation of the new assembly. 5: Install the new thermostat housing assembly in the location where you removed the old one. Make sure it is securely fastened in place using screws or bolts. 6: Reconnect any hoses or wires that were disconnected during removal. Make sure it is properly secured. 7: Refill the radiator with coolant. Start the engine and check for leaks. If there are none, the replacement process is complete.