Hot Racing's rear anti-sway bar (e. g. anti-roll, swaybar, sway bar) set for the 1/7th scale TRA UDR vehicles
FEATURES:
- Designed for quick response, this system use a 3mm spring steel torsion bar to keeps torque twist and body lean to a minimum during acceleration and cornering
- HD 3mm sway bar tuning,
- Aluminum sway bar arms have three mounting positions to fine tune the anti-sway bar
- Anti-sway bar arms and links are anodized red and Black F0RDurability, corrosion resistance, and great looks Easy bolt-on application
YOU WILL RECEIVE:
- One (1) stiff spring steel torsion sway bar
- Two (2) aluminum anti-sway bar arms
- Two (2) aluminum anti-sway bar links
- One 3.1mm drill bit
- Mounting hardware, including screws, bushings, washers, spacers, and o-rings
REQUIREMENTS:
- Use the provided drill bit to enlarge the Sway-bar hole to 3mm
- Recommended to use a removable-type locking adhesive on screws threading into metal
- Tighten setscrew that attaches anti-sway bar arm to the bar itself snugly, but not over-tight. Use a removable threadlock on the setscrew and check tightness regularly.

COMMENTS:

- For the front sway bar set, order Hot Racing UDR311F