Jumper Cable Clamps for Dewalt 20v Batteries, 13.5V Step Down Converter Design, Portable Battery Jumper Starter Automotive Booster Cables Power for Car Jump Starting Using Tool (Battery Not Include)
✅Upgraded circuit design:Jumper Cable Clamps for Milwaukee M18 battery has a new voltage converter design. After the battery passes through the internal circuit, it will output a low voltage within a safe range (approximately between 12v and 13.5v). Most others in the market directly connect the battery voltage to the car, which will cause damage to the car or the M18 battery
✅Specifications and Compatibility: The Jumper Starter is Compatible with Milwaukee M18 battery 18v series 48-11-1815 / 48-11-1820 / 48-11-1828 / 48-11-1840 / 48-11-1850 / 48-11-1860 and more. Product size: 4.84 Inch x 3.22inchx 2.28inch. Output voltage: 13.5v
✅Easy to carry: The Jumper Starter for Milwaukee M18 Battery is designed to be portable and it can be neatly stored in your trunk or under a seat that it's always readily available without taking up significant space when you go on a long drive or travel.When your car battery drains and leaves you stranded, it may be difficult to find someone to help jump start your car.
✅Use instructions: To use Jumper Starter, check your battery power before using.1.Insert the battery into the adapter and lock it securely until the green indicator light is on. 2. Connect the red clip to the positive terminal (+) of the car, connect the black clip to the negative terminal (-)of the car. 3.Turn the key or use the start button to start the car.Once the car starts, disconnect the cables within 30 seconds
✅Note: If you connected in reverse, the red light will flash；If the battery voltage is low (not enough power), the red and green lights will flash (at this time, you need to replace the fully charged tool lithium battery)；Package not include batttery; Remove the jumper starter from the car as soon as possible when your car starts
Note:
1.Compatible with Milwaukee M18 series battery
2.Note: Please do not reverse the operation of the jumper starter. Exercise caution when using this product, as it cannot be overloaded. Please check the power requirements of your equipment before use.
3.Note: Remove the battery from the adapter immediately after use, otherwise the battery may be exhausted.
4.Note:Once the car starts, disconnect the cables within 30 seconds.
5.Note:Package does not include the battery.
-17%
GM Genuine Parts 12657629 Engine Block Heater
KWD 14.500
WIX Filters - 51153 Heavy Duty Cartridge Fuel Metal Canister, Pack of 1
KWD 7.500
-48%
Monroe Shocks & Struts Gas-Magnum 34675 Shock Absorber
KWD 18
IBESTWOLF Suspension Forged Rear Adjustable Track Bar 0-6" Lift for 2007-2018 Jeep Wrangler JK
KWD 41
