Description:
Made of metal and plastic material which is durable and can use for a long time.
The high impedance fuel injector has been tested and exactly matches the internal coil resistance and fuel flow rate of OEM fuel injector.

Specification:
Flow Rate at 43.5psi/3 bar, 23.8Lb/hr, 179.8G/min, 250cc/min
O-Rings Included: Yes, preinstalled
Orifice Type: 4 Holes Disc
Voltage: DC 12V
Material: Metal, Plastic
Color: Beige
OE Number: CDH240, MR507252, 69J137610000
Pin Number: 2
Dimension: 62x33x20mm / 2.44"x1.30"x0.79"(L*W*H)
Inner Diameter: 4mm / 0.16"
Outer Diameter: 10mm / 0.39"

Fitment:
for Mitsubishi Eclipse 2.4L 2001-2005
for Mitsubishi Galant 2.4L 2001-2003
for Mitsubishi Lancer 2.0L 2002-2003
for Yamaha F200 F225 F250 4 Stroke Outboard Motor

Note:
This installation should be done by an experienced mechanic who has access to a factory service manual and all required tools!
This is a non-OEM product, accessory only!

Installation:
Step 1. Make sure the engine is cool down. Disconnect the battery.
Step 2. Remove the bolts and brackets from the fuel rail.
Step 3. Disconnect the plug on each injector.
Step 4. Lift the fuel rail and remove the injector from the fuel rail.
Step 5. Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes.
Step 6. Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery.
Step 7. Double check for fuel leaks before and after starting the engine.

Package Included:
6 x Fuel Injector