Since the sticker is rolled up during transportation, when you receive the product, you will see bubbles in the transfer membrane, but the sticker is intact, it will not have any impact on your stickiness and effect. After the sticker is finished, the transfer membrane needs to be removed. INSTALLATION DETAILS Instruction: Please clean out your vehicle hood before action! √ 1. Peel the white protective film off √ 2. Make sure where you want to paste, comfirm the position √ 3. Stick decal slowly and adjust it to the target position. √ 4. Scrape off air bubbles with squeegee. √ 5. Peel off the transparent transfer film carefully.